If you own a truck, then chances are that you have seen the benefits of installing a Truck Bed Tonneau Cover. If not, this post is for you. These covers provide protection from rain and snow while also securing your cargo from thieves or other threats to your property. In this blog post we will discuss 3 easy steps to install one on your vehicle! It’s time to protect what matters most with a Tonneau Cover!
Here we will discusse how easy it is to install a Truck Bed Tonneau Cover on any truck that has a head rail at the right side of their truck bed. These covers provide protection from rain and snow while also securing your cargo. If you own a truck, then chances are that you have seen the benefits of installing one!
Step One: Start by removing your old cover, or if you have not installed one yet this step is skipped. Next locate the right side of your bed and use a marker to mark where the head rail needs to be cut off. Measure twice and then make sure that it is high enough so when you install the new cover it will sit right on the rail.
Step Two: Now measure how wide your bed is and then cut down a length of headboard to match that width. It should also be about an inch or two shorter than what you measured for height in Step One as it will not need to go all the way up, just enough so there is no gap between the cover and the truck bed.
Step Three: Now you are ready to install your new Truck Bed Tonneau Cover! Start by placing it over the head rail that will be installed on the right side of your truck bed. Line up where the front end is with the middle section near your tailgate, then use zip ties to secure it. Once the front end is secured, use zip ties to secure it all around. Now you are ready to roll your bed cover up and down with ease!
And finally step is to use these tools and instructions in order to install a full-length, new bed tonneau cover. This isn’t too difficult if you follow the right steps!
Which Truck Bed Tonneau Cover is right for you?
There are many different styles of tonneau covers to choose from including retractable and folding models that let your truck bed open up completely when needed. Depending on what type of cargo is in your truck bed, you may want a cover with locks to make sure it’s safe. Other models come in different colors and materials, so you can customize your truck bed storage system for the look that best suits your vehicle!
The truck bed tonneau cover is an important part of a truck’s equipment. It helps protect the cargo in the back by providing a durable weatherproof barrier that can be quickly removed when needed. Installing one on your pickup truck isn’t difficult, but it does require some attention to detail and patience.