How to Remove a Truck Bed Tonneau Cover All by Yourself
How To

How to Remove a Truck Bed Tonneau Cover All by Yourself

Many truck owners find themselves in a bind when it comes to removing their tonneau cover. It is not always the most straightforward process. However, there are ways that you can remove your tonneau cover all by yourself! The first thing that you should do is take a look at the instructions manual for your bed. You can also check with the manufacturer of your truck to see if they have any additional tips or tricks on how to remove your tonneau cover.

Can You Remove a Beb Truck Tonneau Cover by Yourself?

The answer is yes, but it might not be the best idea. The bed of a truck can get very heavy and awkward to maneuver if you’re working by yourself. But it’s possible!

It’s important that when taking off a tonneau cover that the truck bed is empty in order to prevent injury or damage from occurring while trying to load or unload. Before taking off the cover, make sure that all items inside are secured so they don’t fall out when you remove it.

How to Remove a Truck Bed Tonneau Cover All by YourselfThere is a safety lock on most tonneau covers that prevents them from being removed without the key and these locks need to be disengaged before any further steps can take place. The easiest way to disengage the lock is by using the key that came with your cover. Remove the key from its packaging and insert it into a slot on top of the tonneau cover, usually near where you would normally open it. Once inside, use either direction on the arrow until all locks are disengaged.

How to Remove Tonneau Cover?

  • Remove the screws from the bed rails. Place them in a designated area within reach so you are able to find all of your screws when finished.
  • Place a towel or tarp on both sides of the truck bed where tonneau cover is located and unclip it, allowing it to fold over and then lie flat (note that if this part does not work for you, skip ahead)
  • If there is an exposed metal bar holding up one side of your tonneau cover, use a head screwdriver to loosen these bars by turning counterclockwise until they come off (then place them out of sight). If no such rail exists simply proceed with removing any remaining bolts using either Allen wrench or socket.
  • Once all of the bolts have been removed, pull up on one side and use a ratchet to take it off. You may need to do this multiple times or in different directions depending on which direction your cover opens, carefully lift tonneau cover off truck bed and remove it from the vehicle.


As you can see, there is nothing particularly complicated about removing the Bed truck Tonneau cover. The most important thing is to follow the instructions clearly and be careful. Of course, it would be much better if someone could assist you, but if there is no such possibility, you can manage on your own!

Add Comment

Click here to post a comment